Changeset 5083

Timestamp:

Feb 4, 2010 4:03:39 AM (3 years ago)

Author:

ward

Message:

Revision 5051 broke Kconfig booting for the Tyan s2881 board. Up to 5050, there
were two SB_HT_CHAIN_ON_BUS0 sections in the mainboard Kconfig file - one
setting the parameter to 0, the other setting it to 2.

Revision 5051 removed one of the two SB_HT_CHAIN_ON_BUS0 sections - the wrong
one. This patch fixes that.

Revision 5051 removed the wrong setting because newconfig for this board was
*also* wrong. This patch fixes that too.

Tested on real hardware, both with Kconfig and newconfig.

Signed-off-by: Ward Vandewege <ward@…>
Acked-by: Patrick Georgi <patrick.georgi@…>
Acked-by: Stefan Reinauer <stepan@…>

Location:

trunk/src/mainboard/tyan/s2881

Files:

• Kconfig (modified) (1 diff)
• Options.lb (modified) (1 diff)

trunk/src/mainboard/tyan/s2881/Kconfig

@@ -25 +25 @@
 config SB_HT_CHAIN_ON_BUS0
         int
-        default 0
+        default 2
         depends on BOARD_TYAN_S2881
 

trunk/src/mainboard/tyan/s2881/Options.lb

@@ -129 +129 @@
 
 #make the SB HT chain on bus 0, default is not (0)
-default CONFIG_SB_HT_CHAIN_ON_BUS0=0
+default CONFIG_SB_HT_CHAIN_ON_BUS0=2
 
 ##only offset for SB chain?, default is yes(1)